Meetinghouse Network Upgrade. - Revision history

HooperJM: Replaced content with "Oops! There's an extra period at the end of your URL. The article you're lookin for is here: Meetinghouse Network Upgrade"

2026-02-12T21:02:19Z

Replaced content with "Oops! There's an extra period at the end of your URL. The article you're lookin for is here: Meetinghouse Network Upgrade"

← Older revision		Revision as of 21:02, 12 February 2026
Line 1:		Line 1:
	~~= * This article is in draft form, and is not complete * =~~		Oops! There's an extra period at the end of your URL. The article you're lookin for is here: [[Meetinghouse Network Upgrade]]

	~~== Summary ==~~
	~~In the coming months, your unit~~'s building will receive a network and Wi‑Fi upgrade to provide a more secure and reliable experience for everyone. As part of this work, some physical network jacks will be removed or disabled. Devices in leaders’ offices, clerk offices, and other locations—such as resource centers—may need to connect to the Wi‑Fi network after the upgrade.

	~~== Purpose(s) ==~~

	* '''Improved Teaching and Learning Experiences'''- This upgrade is designed to support gospel learning by improving the ability to stream Church videos for lessons, live meeting broadcasts, and provide a backbone for translation technologies. The entire building will receive enhanced Wi‑Fi coverage. And where internet speed increases are needed, they will be increased, based on the availability of faster service plans.
	* '''Wireless preferred'''- The benefits of a wireless preferred approach include flexibility for the end-users and long-term cost savings for the Church. Network drops are expensive to install, maintain, and upgrade, far exceeding the cost of the networking hardware itself. By minimizing the number network jacks, we reduce the overall cost of the network. And by increasing the number of access points in meetinghouses, the end~~-users will find greater flexibility for the placement~~ of ~~equipment and other uses of the network~~.
	* '''Device security and continued operation'''- The access points (MR33) and switches (MS120) in most meetinghouses will no longer be supported by Meraki and needs to be replaced. By upgrading the equipment on schedule, we ensure continued operation, as well as security updates.

	~~== Scope ==~~

	* Replace expiring, obsolete, and unsupported hardware.
	* Ensure cabling meets the Cat6A standard- Modern networking equipment requires a higher standard of cabling than what was installed in some buildings.
	* Ensure internet speeds are at least 500 Mbps- Where internet service providers are available at a reasonable price.
	* Provide a standard, clean, and orderly networking rack.
	* Ensure rack locations meet local building code requirements, are secure, and have sufficient air flow.

	~~== How to prepare ==~~

	* Ensure all of your devices are Wi-Fi ready. If a printer/copier can't connect to the wireless network, you may need to purchase an adapter. At a minimum, ensure the following devices are able to connect to the Wi-Fi network:
	** Clerk computers
	** Office printers
	** TVs
	** Any other devices used for unit administration
	* As a contingency, note the IP and Mac addresses of any devices with static IP assignments. This upgrade ''should'' NOT affect IP ranges. But in rare cases, IP assignments might be affected. If you make note ahead of time, you'~~ll be able to~~ re~~-assign devices post-installation.~~
	* '''*Note*''' If your network still includes a FAC16 zone (Facility zone with 16 addresses), please upgrade at your earliest convenience to a FAC32 zone, through the "upgrade IP range" link in CNM. This change can be made irrespective of the network upgrade, but you will definitely need to make a note of all devices, in particular door access systems that have a static IP reservation assigned. Write down their Mac addresses and their IP addresses, and follow the in-app instructions to ensure a successful upgrade.

	~~== What to do after the installation ==~~

	* Please utilize CNM to ensure the network is ~~functioning properly, and all necessary devices are connected to the network~~
	'''Note*''': ~~You do not need to fix issues with the physical installation. Contact your Facility Manager, who will require the contractors to address any of the following issues:~~
	**Damaged or dead cables
	**Cables installed in walkways or present any kind of a safety hazard.

	~~== Frequently Asked Questions ==~~

	* '''Question''': What about the network jack in the pulpit?
	* Answer: The network jack at the pulpit may not be reconnected as part of this project. While the pulpit is part of the AV system, if the existing cable does not reach the new or current network rack location, it may remain disconnected until the AV system is replaced or upgraded.

	* '''Question:''' Will my network rack be moved?
	* Answer: Generally, network racks will be left in place. The following reasons might require a network rack to be relocated:
	** Meet code requirements
	** Improve security (behind a locked door)
	** Ensure a clean, safe environment with sufficient airflow for cooling.

HooperJM: /* What to do after the installation */

2026-02-11T18:51:31Z

What to do after the installation

← Older revision		Revision as of 18:51, 11 February 2026
Line 6:		Line 6:
	== Purpose(s) ==		== Purpose(s) ==

	* Improved Teaching and Learning Experiences- This upgrade is designed to support gospel learning by improving the ability to stream Church videos for lessons, live meeting broadcasts, and provide a backbone for translation technologies. The entire building will receive enhanced Wi‑Fi coverage. And where internet speed increases are needed, they will be increased, based on the availability of faster service plans.		* '''Improved Teaching and Learning Experiences'''- This upgrade is designed to support gospel learning by improving the ability to stream Church videos for lessons, live meeting broadcasts, and provide a backbone for translation technologies. The entire building will receive enhanced Wi‑Fi coverage. And where internet speed increases are needed, they will be increased, based on the availability of faster service plans.
	* Wireless preferred- The benefits of a wireless preferred approach include flexibility for the end-users and long-term cost savings for the Church. Network drops are expensive to install, maintain, and upgrade, far exceeding the cost of the networking hardware itself. By minimizing the number network jacks, we reduce the overall cost of the network. And by increasing the number of access points in meetinghouses, the end-users will find greater flexibility for the placement of equipment and other uses of the network.		* '''Wireless preferred'''- The benefits of a wireless preferred approach include flexibility for the end-users and long-term cost savings for the Church. Network drops are expensive to install, maintain, and upgrade, far exceeding the cost of the networking hardware itself. By minimizing the number network jacks, we reduce the overall cost of the network. And by increasing the number of access points in meetinghouses, the end-users will find greater flexibility for the placement of equipment and other uses of the network.
	* Device security and continued operation- The access points (MR33) and switches (MS120) in most meetinghouses will no longer be supported by Meraki and needs to be replaced. By upgrading the equipment on schedule, we ensure continued operation, as well as security updates.		* '''Device security and continued operation'''- The access points (MR33) and switches (MS120) in most meetinghouses will no longer be supported by Meraki and needs to be replaced. By upgrading the equipment on schedule, we ensure continued operation, as well as security updates.

	== Scope ==		== Scope ==
Line 26:		Line 26:
	** Any other devices used for unit administration		** Any other devices used for unit administration
	* As a contingency, note the IP and Mac addresses of any devices with static IP assignments. This upgrade ''should'' NOT affect IP ranges. But in rare cases, IP assignments might be affected. If you make note ahead of time, you'll be able to re-assign devices post-installation.		* As a contingency, note the IP and Mac addresses of any devices with static IP assignments. This upgrade ''should'' NOT affect IP ranges. But in rare cases, IP assignments might be affected. If you make note ahead of time, you'll be able to re-assign devices post-installation.
			* '''*Note*''' If your network still includes a FAC16 zone (Facility zone with 16 addresses), please upgrade at your earliest convenience to a FAC32 zone, through the "upgrade IP range" link in CNM. This change can be made irrespective of the network upgrade, but you will definitely need to make a note of all devices, in particular door access systems that have a static IP reservation assigned. Write down their Mac addresses and their IP addresses, and follow the in-app instructions to ensure a successful upgrade.

	== What to do after the installation ==		== What to do after the installation ==

	* Please utilize CNM to ensure the network is functioning properly.		* Please utilize CNM to ensure the network is functioning properly, and all necessary devices are connected to the network
	*		'''Note*''': You do not need to fix issues with the physical installation. Contact your Facility Manager, who will require the contractors to address any of the following issues:
			**Damaged or dead cables
			**Cables installed in walkways or present any kind of a safety hazard.

	== Frequently Asked Questions ==		== Frequently Asked Questions ==
Line 42:		Line 45:
	** Improve security (behind a locked door)		** Improve security (behind a locked door)
	** Ensure a clean, safe environment with sufficient airflow for cooling.		** Ensure a clean, safe environment with sufficient airflow for cooling.

	* '''Question:'''

HooperJM: /* What to do after the installation */

2026-02-11T18:43:37Z

What to do after the installation

← Older revision		Revision as of 18:43, 11 February 2026
Line 20:		Line 20:
	== How to prepare ==		== How to prepare ==

	* Ensure all of your devices are Wi-Fi ready. If a printer/copier can't connect to the wireless network, you may need to purchase an adapter.		* Ensure all of your devices are Wi-Fi ready. If a printer/copier can't connect to the wireless network, you may need to purchase an adapter. At a minimum, ensure the following devices are able to connect to the Wi-Fi network:
	* ~~Note~~ the IP and Mac addresses of any devices with static IP assignments. This upgrade ''should'' NOT affect IP ranges. But in rare cases, IP assignments might be affected. If you make note ahead of time, you'll be able to re-assign devices post-installation.		** Clerk computers
			** Office printers
			** TVs
			** Any other devices used for unit administration
			* As a contingency, note the IP and Mac addresses of any devices with static IP assignments. This upgrade ''should'' NOT affect IP ranges. But in rare cases, IP assignments might be affected. If you make note ahead of time, you'll be able to re-assign devices post-installation.

	== What to do after the installation ==		== What to do after the installation ==

HooperJM: /* Frequently Asked Questions */

2026-02-11T00:13:05Z

Frequently Asked Questions

← Older revision		Revision as of 00:13, 11 February 2026
Line 1:		Line 1:
			= * This article is in draft form, and is not complete * =

	== Summary ==		== Summary ==
	In the coming months, your unit's building will receive a ~~significant~~ network and Wi‑Fi upgrade to provide a more secure and reliable experience for everyone. As part of this work, some physical network jacks will be removed or disabled. Devices in leaders’ offices, clerk offices, and other locations—such as resource centers—may need to connect to the Wi‑Fi network after the upgrade.		In the coming months, your unit's building will receive a network and Wi‑Fi upgrade to provide a more secure and reliable experience for everyone. As part of this work, some physical network jacks will be removed or disabled. Devices in leaders’ offices, clerk offices, and other locations—such as resource centers—may need to connect to the Wi‑Fi network after the upgrade.

	== Purpose(s) ==		== Purpose(s) ==

	* Improved Teaching and Learning Experiences- This upgrade is designed to support gospel learning by improving the ability to stream Church videos for lessons, live meeting broadcasts, and provide a backbone for translation technologies. The entire building will receive enhanced Wi‑Fi coverage. And where internet speed increases are needed, they will be increased, based on the availability of faster service plans.		* Improved Teaching and Learning Experiences- This upgrade is designed to support gospel learning by improving the ability to stream Church videos for lessons, live meeting broadcasts, and provide a backbone for translation technologies. The entire building will receive enhanced Wi‑Fi coverage. And where internet speed increases are needed, they will be increased, based on the availability of faster service plans.
	* Wireless preferred-		* Wireless preferred- The benefits of a wireless preferred approach include flexibility for the end-users and long-term cost savings for the Church. Network drops are expensive to install, maintain, and upgrade, far exceeding the cost of the networking hardware itself. By minimizing the number network jacks, we reduce the overall cost of the network. And by increasing the number of access points in meetinghouses, the end-users will find greater flexibility for the placement of equipment and other uses of the network.
	* Device security and continued operation-		* Device security and continued operation- The access points (MR33) and switches (MS120) in most meetinghouses will no longer be supported by Meraki and needs to be replaced. By upgrading the equipment on schedule, we ensure continued operation, as well as security updates.

	== Scope ==		== Scope ==

	* Replace expiring, obsolete, and unsupported hardware~~- The MR33 access point will no longer be supported by Meraki and needs to be replaced~~.		* Replace expiring, obsolete, and unsupported hardware.
	* Ensure cabling meets the Cat6A standard- Modern networking equipment requires a higher standard of cabling than what was installed in some buildings.		* Ensure cabling meets the Cat6A standard- Modern networking equipment requires a higher standard of cabling than what was installed in some buildings.
	* Ensure internet speeds are at least 500 Mbps- Where internet service providers are available at a reasonable price.		* Ensure internet speeds are at least 500 Mbps- Where internet service providers are available at a reasonable price.
	* Provide a standard, clean, and orderly networking rack		* Provide a standard, clean, and orderly networking rack.
	* Ensure rack locations meet local building code requirements, are secure, and have sufficient air flow.		* Ensure rack locations meet local building code requirements, are secure, and have sufficient air flow.

Line 37:		Line 39:
	** Ensure a clean, safe environment with sufficient airflow for cooling.		** Ensure a clean, safe environment with sufficient airflow for cooling.

	* Question:		* '''Question:'''

HooperJM: /* Frequently Asked Questions */

2026-02-10T23:48:40Z

Frequently Asked Questions

← Older revision		Revision as of 23:48, 10 February 2026
Line 27:		Line 27:

	== Frequently Asked Questions ==		== Frequently Asked Questions ==

			* '''Question''': What about the network jack in the pulpit?
			* Answer: The network jack at the pulpit may not be reconnected as part of this project. While the pulpit is part of the AV system, if the existing cable does not reach the new or current network rack location, it may remain disconnected until the AV system is replaced or upgraded.

			* '''Question:''' Will my network rack be moved?
			* Answer: Generally, network racks will be left in place. The following reasons might require a network rack to be relocated:
			** Meet code requirements
			** Improve security (behind a locked door)
			** Ensure a clean, safe environment with sufficient airflow for cooling.

			* Question:

HooperJM: /* What to do after the installation */

2026-02-10T22:28:38Z

What to do after the installation

← Older revision		Revision as of 22:28, 10 February 2026
Line 22:		Line 22:

	== What to do after the installation ==		== What to do after the installation ==

			* Please utilize CNM to ensure the network is functioning properly.
			*

	== Frequently Asked Questions ==		== Frequently Asked Questions ==

HooperJM at 22:06, 10 February 2026

2026-02-10T22:06:35Z

← Older revision		Revision as of 22:06, 10 February 2026
Line 10:		Line 10:
	== Scope ==		== Scope ==

	* Replace expiring, obsolete, and unsupported hardware- The MR33 access point will no longer be supported by Meraki and ~~need~~ to be replaced.		* Replace expiring, obsolete, and unsupported hardware- The MR33 access point will no longer be supported by Meraki and needs to be replaced.
	* Ensure cabling meets the Cat6A standard- Modern networking equipment requires a higher standard of cabling than what was installed in some buildings.		* Ensure cabling meets the Cat6A standard- Modern networking equipment requires a higher standard of cabling than what was installed in some buildings.
	* Ensure internet speeds are at least 500 Mbps- Where internet service providers are available at a reasonable price.		* Ensure internet speeds are at least 500 Mbps- Where internet service providers are available at a reasonable price.
	* Provide a standard, clean, and orderly networking rack		* Provide a standard, clean, and orderly networking rack
			* Ensure rack locations meet local building code requirements, are secure, and have sufficient air flow.

	== How to prepare ==		== How to prepare ==

			* Ensure all of your devices are Wi-Fi ready. If a printer/copier can't connect to the wireless network, you may need to purchase an adapter.
			* Note the IP and Mac addresses of any devices with static IP assignments. This upgrade ''should'' NOT affect IP ranges. But in rare cases, IP assignments might be affected. If you make note ahead of time, you'll be able to re-assign devices post-installation.

	== What to do after the installation ==		== What to do after the installation ==

	== Frequently Asked Questions ==		== Frequently Asked Questions ==

HooperJM at 21:45, 10 February 2026

2026-02-10T21:45:13Z

← Older revision		Revision as of 21:45, 10 February 2026
Line 2:		Line 2:
	In the coming months, your unit's building will receive a significant network and Wi‑Fi upgrade to provide a more secure and reliable experience for everyone. As part of this work, some physical network jacks will be removed or disabled. Devices in leaders’ offices, clerk offices, and other locations—such as resource centers—may need to connect to the Wi‑Fi network after the upgrade.		In the coming months, your unit's building will receive a significant network and Wi‑Fi upgrade to provide a more secure and reliable experience for everyone. As part of this work, some physical network jacks will be removed or disabled. Devices in leaders’ offices, clerk offices, and other locations—such as resource centers—may need to connect to the Wi‑Fi network after the upgrade.

	== Purpose ==		== Purpose(s) ==

	* Improved Teaching and Learning Experiences- This upgrade is designed to support gospel learning by improving the ability to stream Church videos for lessons, live meeting broadcasts, and provide a backbone for translation technologies. The entire building will receive enhanced Wi‑Fi coverage. And where internet speed increases are needed, they will be increased, based on the availability of faster service plans.		* Improved Teaching and Learning Experiences- This upgrade is designed to support gospel learning by improving the ability to stream Church videos for lessons, live meeting broadcasts, and provide a backbone for translation technologies. The entire building will receive enhanced Wi‑Fi coverage. And where internet speed increases are needed, they will be increased, based on the availability of faster service plans.
			* Wireless preferred-
			* Device security and continued operation-

	== Scope ==		== Scope ==
Line 11:		Line 13:
	* Ensure cabling meets the Cat6A standard- Modern networking equipment requires a higher standard of cabling than what was installed in some buildings.		* Ensure cabling meets the Cat6A standard- Modern networking equipment requires a higher standard of cabling than what was installed in some buildings.
	* Ensure internet speeds are at least 500 Mbps- Where internet service providers are available at a reasonable price.		* Ensure internet speeds are at least 500 Mbps- Where internet service providers are available at a reasonable price.
	* Provide a standard, clean, and orderly networking rack~~- The equipment in some meetinghouses~~		* Provide a standard, clean, and orderly networking rack

	== How to prepare ==		== How to prepare ==

HooperJM: Created page with "== Summary == In the coming months, your unit's building will receive a significant network and Wi‑Fi upgrade to provide a more secure and reliable experience for everyone. As part of this work, some physical network jacks will be removed or disabled. Devices in leaders’ offices, clerk offices, and other locations—such as resource centers—may need to connect to the Wi‑Fi network after the upgrade. == Purpose == * Improved Teaching and Learning Experiences- Th..."

2026-02-10T21:33:44Z

Created page with "== Summary == In the coming months, your unit's building will receive a significant network and Wi‑Fi upgrade to provide a more secure and reliable experience for everyone. As part of this work, some physical network jacks will be removed or disabled. Devices in leaders’ offices, clerk offices, and other locations—such as resource centers—may need to connect to the Wi‑Fi network after the upgrade. == Purpose == * Improved Teaching and Learning Experiences- Th..."

New page

== Summary ==
In the coming months, your unit's building will receive a significant network and Wi‑Fi upgrade to provide a more secure and reliable experience for everyone. As part of this work, some physical network jacks will be removed or disabled. Devices in leaders’ offices, clerk offices, and other locations—such as resource centers—may need to connect to the Wi‑Fi network after the upgrade.

== Purpose ==

* Improved Teaching and Learning Experiences- This upgrade is designed to support gospel learning by improving the ability to stream Church videos for lessons, live meeting broadcasts, and provide a backbone for translation technologies. The entire building will receive enhanced Wi‑Fi coverage. And where internet speed increases are needed, they will be increased, based on the availability of faster service plans.

== Scope ==

* Replace expiring, obsolete, and unsupported hardware- The MR33 access point will no longer be supported by Meraki and need to be replaced.
* Ensure cabling meets the Cat6A standard- Modern networking equipment requires a higher standard of cabling than what was installed in some buildings.
* Ensure internet speeds are at least 500 Mbps- Where internet service providers are available at a reasonable price.
* Provide a standard, clean, and orderly networking rack- The equipment in some meetinghouses

== How to prepare ==

== What to do after the installation ==

== Frequently Asked Questions ==