AirPlay stopped working in our buildings after network upgrade for kindoo

[datbates]

It seems that the church has upgraded our buildings to have an IOT connect network. This had to do with the Kindoo upgrade. When they did this, I believe they turned on network isolation on Liahona, but this has a side effect of making AirPlay and Chromecast not work on our Roku TVs.

How do they expect us to make this work now?
Is there a way to exclude network isolation for certain ips or something?
What network should the TV be on (I assume it still has to be on liahona)?

I tried moving it to the IOT network, but I still couldn’t see it.

We do have a couple TVs in buildings that have a direct ethernet connection and that seems to work, but running cables is not my favorite

[steve.robertson]

There has not been a change in the network zone isolation. There was a Cisco firmware bug that affected multicast protocols transmitted by the APs. The firmware patch has been applied to all the networks. The TV should be on Liahona.

[dlpyro1957]

The church is changing all of the switch's and AP. You may want to look to see if that tv is still set for no splash

[russellhltn]

The church is changing all of the switch's and AP.

Do you know what they're changing it to?

[dlpyro1957]

AP and switches are now Cisco from Meraki. I know in one of my buildings I had to get them to reset the No splash for one og my TVs.

[russellhltn]

AP and switches are now Cisco from Meraki. I know in one of my buildings I had to get them to reset the No splash for one og my TVs.

The buildings in my area are on at least a second generation of Meraki. Currently MX64 firewalls, MA120 switches and MR33 APs with a few newer MR36.